How to use

1. Face down: Lay your bracelet flat with the logo side facing down.

2. Find the gap: Look at the side of the link — you’ll see a tiny opening where the spring sits.

3. Slide and lift: Insert the flat end of the tool into the gap, then gently lever to release the spring. The link will open.

4. Swap tiles: Slide the tile out/in.

5. Close: Reverse the motion so the spring clicks back into place.

6. Repeat for the next link as needed.

Tips

• Work on a soft surface to avoid scratches.

• Use light pressure — the spring should release without force.

• If a link feels stuck, move the tool a millimetre along the edge and try again.

Good to know: Links are compatible with standard 9 mm Italian charms (most brands). Not compatible with mini/micro sizes.